All projects · Kitchen cabinet
Spice organizers
v1.1 · waiting for jar and cabinet measurementsTwo removable stepped racks for 28 spice jars (20 small, 8 large) in a 265 mm wide kitchen cabinet. Three rows per compartment, so every label stays visible.
Drawings
Key dimensions
- Platforms
- tops at 40 mm (middle row) and 80 mm (rear row)
- Clearance
- 7.5 mm each side, 10 mm at the front
- Parts
- 6 per rack, 12 total, all from one 800 × 300 piece
- Weight
- about 0.4 kg per rack, before jars
- Middle rack, if needed
- lower steps at 20 / 40 mm, same footprint
All sizes in mm. Material: 10 mm okoumé plywood, painted white.
Why it looks like this
- To take a jar out you lift it over the jar in front. With 135 mm jars that needs 310 mm; the middle compartment has 260.
- Fix: the 14 shortest jars go in the middle compartment, tallest of those in the front row.
- Rule (H = clear height): front + middle jar ≤ H − 10, and middle step + middle jar + rear jar ≤ H − 10.
- Stronger than v1.0: stepped side panels + two rails make each rack one rigid box.
What to build
Cutting list
For 40/80 mm steps. Final only after the measurements and the cardboard test. Cut the 4 strips first (75, 75, 70, 70).
| Part | Size (mm) | Per rack | Total |
|---|---|---|---|
| A · Middle platform | 250 × 75 | 1 | 2 |
| B · Rear platform | 250 × 75 | 1 | 2 |
| C · Side panel, stepped | 150 × 70, notch 75 × 40 at the top front | 2 | 4 |
| D · Rail, front and back | 230 × 70 (= 250 − 2 × real thickness) | 2 | 4 |
Steps
- Measure the cabinet and all 28 jars, lids on (see the checks below).
- Build a cardboard test rack and try it in the middle compartment with its 14 jars.
- Confirm the step heights and jar layout. Then buy and cut.
- Dry-fit the six parts with tape. The rails must fit snugly between the side panels.
- Glue the two rails between the side panels: front rail at the step, back rail flush with the back. Clamp, check the diagonals.
- Glue the rear platform B on top, flush at the back and sides.
- Glue the middle platform A on the low part of the side panels, tight against the front rail.
- Let it cure. Put about 2 kg on each platform overnight and push sideways: no sag, no racking.
- Sand 120 → 180 → 240, round the edges, seal the edges, 2 thin coats of white paint. Let it fully cure.
- Stick the anti-slip pads, load the jars, test. Then build the second rack.
Before you buy
Measure or confirm these first. Tick them as you go: ticks stay on this device.
What to buy
Materials
66,80 €Prices checked at Leroy Merlin Nanterre, 15 Nov 2026.
-
Contreplaqué okoumé extérieur 10 mm, découpe 800 × 300
0.24 m² at 61.90 €/m², cutting included. Brownish-pink: paint it white.
View at Leroy Merlin ↗14,86 €
-
Contreplaqué peuplier 10 mm, 150 × 60 cm
Light wood, but an outside seller, web only, lots of waste. Not counted.
View at Leroy Merlin ↗44,88 €
-
11,90 €
-
8 tampons polyuréthane STANDERS Ø22
4 per rack. Rubber, not felt (felt slides)
View at Leroy Merlin ↗3,69 €
-
2,99 €
-
Peinture meuble RIPOLIN blanc satiné 250 ml
For okoumé. With poplar, use clear water-based varnish
View at Leroy Merlin ↗13,90 €
-
Minirouleau DEXTER 110 mm
View at Leroy Merlin ↗6,99 €
-
10 papiers abrasifs DEXTER 120/180/240
View at Leroy Merlin ↗8,99 €
-
0,99 €
-
2,49 €
Tools
103,94 €Only if you don't have them yet.
-
14,90 €
-
Serre-joint à 1 main DEXTER 300 mm
View at Leroy Merlin ↗31,80 €
-
Équerre de menuisier 30 cm
View at Leroy Merlin ↗2,99 €
-
Règle DEXTER 50 cm
View at Leroy Merlin ↗5,39 €
-
Crayon de menuisier DEXTER
View at Leroy Merlin ↗0,99 €
-
Cale à poncer 85 × 160 mm
View at Leroy Merlin ↗2,00 €
-
Lunettes de protection
Search at Leroy Merlin ↗4,39 €
-
3 masques FFP2 DEXTER
Search at Leroy Merlin ↗3,99 €
-
37,49 €
Files and sources
In Claude
These open in your Claude account and are private to you.